DarkAngel's #771 03.5 MSP is going forged......(Build/Log)

[DarkAngel]

Well couple of updates. Have been taking off all the accessories to the blown engine and noticed the turbo is soaked inside with oil and also a lot of shaft play. Will have to look for a new turbo. I am hoping to find a GT28R or GT28RS for a good price and cheaper if I have to rebuild, I dont mind. I am going to see if I can fix the MBSP as it still looks like its in good condition. Here are some pictures after I took off the starter.



Here is the carnage of what I could get from outside.



I took some pictures for those that are wanting to do the External PRV. Took a picture of the width available if anyone want to run the return line to the MBSP through the rear.



Here is a 21MM Socket that fit just tightly to show the width. The width available is 32MM. Now this is give or take a couple as the section there is concaved in and can allow just a bit more clearance with an AN fitting adapter. Hope this help people out.